Apparently non-lead-free plumbing solder is usually 50/50 tin-lead. I wonder why that is, when it's so far from eutectic? Electrical solder is almost always either 60/40 (a simple ratio close to eutectic) or 63/37 (exactly eutectic).

Follow

@JulieSqveakaroo But eutectic alloys are, almost by definition, easy to make. They have the lowest melting point of any possible combination of the metals, and they have a single melting point rather than a melting range.

@JulieSqveakaroo Cost to make could be it though. Tin is more expensive than lead, so using an equal mixture instead of a tin-rich 60/40 would be cheaper.

@Felthry

Sadly, that is possible... a lot of the metals we get in at the shop are less than ideal due to a higher qvantity (though still in the standard ranges) of the cheaper metals in the smelt.

Sign in to participate in the conversation
Awoo Space

Awoo.space is a Mastodon instance where members can rely on a team of moderators to help resolve conflict, and limits federation with other instances using a specific access list to minimize abuse.

While mature content is allowed here, we strongly believe in being able to choose to engage with content on your own terms, so please make sure to put mature and potentially sensitive content behind the CW feature with enough description that people know what it's about.

Before signing up, please read our community guidelines. While it's a very broad swath of topics it covers, please do your best! We believe that as long as you're putting forth genuine effort to limit harm you might cause – even if you haven't read the document – you'll be okay!