The #repair of this day is the water cooling circuit of the laser-tube in #CCCAC which broke last weekend.
The fix was made with a 3D printed part (modeled in #FreeCAD) that fits over the broken barb.
Unfortunately the FDM print was not watertight even with 100% infill. So I had to put even more epoxy around the part. Not it does not look as nice, but It seems to work.
No drops after 30min of runtime.
@cccpresser aw, would've been nice to do some testing with higher temps for better layer adhesion, but that design would've probably had to have less overhangs for that
@noiob You can print a stupid 'pressure vessel' for further tests.
We have plenty of fittings left we can use for experimenting with water pressure.
I would really like to know if one can get the FDM print watertight. Perhaps bricklayer-mode?
@cccpresser you can make PETG layers melt into each other if you get them really hot and overextrude some. but it takes some tuning and all I got to work was messier. Also overhangs will droop a lot https://www.youtube.com/watch?v=9qb25Gi4Jv0
