this is from hakko's official marketing blurb about the FX-888D

this is what said interface looks like. that's all there is other than a power switch on the side. you can't tell me that's easy to use, that's the most unintuitive interface imaginable
-F

@Felthry wh...

...does... does the up button increase the temperature??... d-does it have an upper limit??... does it just keep going up infinitely???

.... and... why does the enter button exist what purpose could it have

@Nine the up button cycles between five preset temperatures, and there's some arcane method of changing the presets that you can't do without the manual

there's also a password system, somehow, for process control
-F

@Felthry @Nine …what if you need it a few degrees hotter on the spot

Follow

@noiob @Nine gotta go through the complicated process of changing the presets
-F

@Felthry @Nine what happened to just having "up" and "down"

@noiob @Nine none of that annoyance of "having to remember the layout of a keypad" or "having up and down buttons"
-F

@Felthry @Nine I have a two-button USB soldering iron that has a more intuitive interface than this

@Felthry @Nine you can put a password on your soldering iron

@noiob @Felthry gotta use flux to make sure the solder flows into the right configuration for the password

@Nine @Felthry it can't be that hard to put a few more buttons on a 150€ soldering iron

@noiob @Nine €150? it's only $100-ish here

your point still stands though
-F

@Felthry @Nine you can probably get it cheaper but this is the first hit on duckduckgo

@noiob @Nine there's actual reason for this, process control stuff

you don't want some worker who thinks they know better changing the temperature and ending up with a lot of unreliable cold joints, or heating the board too much and damaging parts--and even if it doesn't damage anything if a part fails and you complain to the manufacturer they'll just say "well you didn't solder it to our specifications so too bad"
-F

@Felthry @Nine that's not a problem to be solved with tools, that's a problem to be solved with proper training

@noiob @Nine i mean i agree but also the thing i said about complaining to the manufacturer of a faulty part? they'll look at the fact that the temperature *could* have been changed and say too bad, we're not doing anything for you
-F

Sign in to participate in the conversation
Awoo Space

Awoo.space is a Mastodon instance where members can rely on a team of moderators to help resolve conflict, and limits federation with other instances using a specific access list to minimize abuse.

While mature content is allowed here, we strongly believe in being able to choose to engage with content on your own terms, so please make sure to put mature and potentially sensitive content behind the CW feature with enough description that people know what it's about.

Before signing up, please read our community guidelines. While it's a very broad swath of topics it covers, please do your best! We believe that as long as you're putting forth genuine effort to limit harm you might cause – even if you haven't read the document – you'll be okay!