@typhlosion @rey progress! try Lizard in it again maybe? That sounds like the closest thing to a known good cartridge you have

It's also possible the cartridge connector is too oxidized to make good contact; that's easy enough to clean. You can just spray contact cleaner in there and that usually helps, but you can also get these purpose-made things like this https://www.1upcard.com/products/the-1upcard-nes-console-and-game-cleaner-bundle?variant=20327843398

it's just an NES cartridge with a mild abrasive instead of electrical contacts, so it cleans off the oxide
-F

@Felthry @rey yeah, i'll try lizard in it next. that one was completely unused and hadn't even been taken out of the box before i tried it last night, so if that one isn't good it's definitely not due to usage

i did a quick visual inspection of the pin connector on the NES side when i had everything off, and it didn't look corroded (i think someone had replaced it before i got it) which is why i think it's an issue with the Golf cartridge (perhaps corrosion on *those* pins)

@typhlosion @rey yeah there could be corrosion on the cartridge pins too

if someone's replaced the cartridge connector on the NES side that doesn't necessarily mean it's good, for something like this you want pretty good gold plating on the contacts and nintendo used a pretty thin gold plating (which rubbed off over many cartridge insertions) and some of the replacements don't even use gold at all (good ones would probably be like, 30-50 μ" gold and yes that's a very cursed unit)
-F

@typhlosion @rey (it's probably fine though)
-F

@Felthry @rey success!! the music plays, all the controls work and everything. there are those wavy striations on the video output but im assuming those are just an artifact of some kind of something relating to using the NES with a modern television, or such. doesn't bother me either way

cc @rainwarrior thank you for your cool game that helped me test my NES repair job

@typhlosion @rey @rainwarrior excellent! glad it worked

i could go into what the striations are if you're interested, but you're correct that it's a consequence of using it with a modern tv
-F

@Felthry @rey @rainwarrior isn't it something to do with the video not being precisely 60Hz? i am indeed interested

@Felthry @rey (also let's probably untag brad from this thread now oops)

@typhlosion @rey yeah i was going to do that, dunno if rey wants to be untagged too

it might be that? more likely to be artefacts of either the RF or composite output, which both lose some information in the process of modulating stuff

i'm assuming your NES hasn't been modded to have a component or s-video output here, if it has it's something else
-F

@Felthry @rey it has red and yellow jacks on the side for video and audio, if thats what you mean. i think the guy who sold it to me mentioned that that was a mod

@Felthry @rey oh wait thats composite. i am a neophyte

@typhlosion @rey that's not a mod, some later model NESes had that

that's composite output, where the color and intensity information are both sent over the same wire
-F

@typhlosion @rey i mean, it *could* be a mod if it's an early model NES, the kind that only had RF output, but I dunno why you'd go to the trouble of modding it and not use component or rgb
-F

@Felthry @rey is the RF shield actually necessary to put back on

@typhlosion @rey If you care about compliance to FCC regulations,.... maybe?

if you don't, no
-F

@Felthry @rey what's the most dire possible consequence of not putting it back on

@typhlosion @rey your radio picks up a bit more static
-F

@Felthry @rey oh nooooooo

i think im gonna leave it off, and then maybe see if i can get a transparent plastic casemod for the nes (at least the top cover), because i think that would look cool and also be a reminder to myself that i have in fact user-serviced it in some rudimentary way (this is a huge triumph for me)

@typhlosion @rey well congratulations! your first Electronics Thing
-F

@typhlosion @rey the FCC had a big crackdown on electrical noise in the 80s and they didn't really know how to mitigate noise like we do today, and didn't really have the tools to model it well, so a lot of 80s stuff has ridiculous shielding on it
-F

@rainwarrior @typhlosion I might have the NES and Famicom models confused! I don't know why they would drop composite out though, composite was the better quality option at the time
-F

@rainwarrior @typhlosion Shaving off a few pennies!

your typical console even has to mix RGB signals into composite, too--you could have just output the RGB signals, but that was never common as an input on tvs (maybe outside of europe? I know the SCART connector had dedicated rgb pins but i dunno how many tvs supported that mode)

that's why RGB or YPbPr (composite) mods are so easy on a lot of systems
-F

@rainwarrior @typhlosion also yeah we only *know* of the composite-on-the-board being a thing on the snes and i think genesis? genesis might have just been chroma/luma on the board though, not rgb
-F

@rainwarrior @typhlosion oh yeah, recapping might cut down on those lines a bit

you get those a lot more with RF or composite output too, just because those are lower bandwidth
-F

@rainwarrior @typhlosion clearly i don't know as much about the nes specifically as i'd thought!

gold plating on these types of connectors is kinda the standard, i'd be surprised if nintendo didn't use it
-F

@rainwarrior @typhlosion you definitely have to gold plate the cartridges yeah, edge connectors won't last very long if they don't have a hard gold plating
-F

@rainwarrior @typhlosion aaa now i'm feeling embarrassed, i was pretty confident in most of that but apparently we just got it from some who-knows-where unreliable source
-F

@rainwarrior @typhlosion it's just two card edge connectors connected with a ribbon cable right? should be pretty easy to make, card edge connectors are cheap (though gold plated ones obviously a little more expensive)

i suspect it's going to be a standard spacing too
-F

@rainwarrior @typhlosion oh, but you'd need to do something about the spacer

i would probably try mounting two standard connectors on a PCB, maybe? Perhaps with 3d-printed supports
-F

@rainwarrior @typhlosion oh yeah that's not far off from what i was thinking of
-F

@rainwarrior @typhlosion i am surprised at the lack of gold plating but i guess when you're an engineer who works mostly on one-off custom test equipment with a relatively large budget and no need to think about profit margin, you get used to always going for the gold plating
-F

@rainwarrior @typhlosion ah yeah at that many pins the discrepancy adds up

2.5 mm *is* a standard size, but an uncommon one; digikey doesn't have any 72-pin card edge connectors in that pitch

there are a couple companies out there that will do custom connectors, though the minimum order quantity is usually in the hundreds or thousands
-F

@rainwarrior @typhlosion Disabling the lockout is usually a good mod to do anyway, the 10NES will sometimes just start doing its reset loop even on an otherwise perfectly functional and legitimate game
-F